Compact line array speaker - Narrow coverage

3 acoustic ways / bi-amp
x 6.5" Nd (1.5" voice coil) 
1 x APG IsotopTM driver(15 °V)

Isotop Appolito

The UC206N model is the medium/long throw speaker of the modular line array system UNILINE COMPACT that includes also the short/medium throw speaker UC206W and the dedicated bass speaker UC115B. The high level of scalability of the Uniline Compact allows all types of configurations (flowned or stacked) combining these three speakers. This results in a number of almost unlimited combinations to adapt precisely the system configuration to the need and installation constraints of all venues and shows.

The Uniline Compact operates on three acoustic modes: in the "stand-alone" mode, UC206N /W speaker systems are suitable for medium power voice and music reproduction. In "extended" mode, UC206N /W are combined with UL115B or APG subs for high precision music applications. In the "complete mode", all Uniline speakers (UC206N, UC206W, UL115B and APG subs) are combined for high power, long throw and live music applications.

In terms of acoustics, two speakers of 6.5 fit the low medium section and an APG Isotop15TM device (2-way coaxial) section equip the mid / highsection. Despite its compactness, the UC206N integrates 3 acoustic ways to provide optimum sonic quality reproduction and superior power section's capacity.

The UC206N is also characterized by a constant horizontal opening of 70° from 450Hz to 19KHz section. The directivity index is particularly favorable to improve critical distance as well as intelligibility for indoors and increase substancially capacity of throw for outdoors 

The Uniline Compact system is usable from 3 speakers of UC206N for small range applications. However the rigging accessory UCTRUSS authorize up to 20 speaker clusters of UC206N/W for high precision and long range coverage.

Lifting and transport systems are designed to minimize and facilitate set up while ensuring a high level of security. 

The “electronic” modularity is based on the APG digital processors for which control software, networking tools and full bank of presets are provided.


• Exceptional size / power ratio 
• Horizontal constant directivity 70°
• Integrated and intuitive rigging system
• Low weight and easy handling


• Short to mid/long throw
• High precision acoustic coverage
• High intelligibility reproduction
• Fixed or temporary installation, touring

Acoustic simulation

• Ease Focus
• Ease

Technical characteristics

Acoustic way  / Mode
Transducer (Ø coil)

3 way / bi amp
2x6,5"ND (1.5")**    
1xIsotop15TM ND

Bandwidth @-3dB
Directivity @ -6dB

65Hz - 19kHz*
70°H x 15°V

Nominal Impedance
AES Power
Recommended amplification

lo : 16 Ohm             mid/hi : 16 Ohm
lo : 300W                 mid/hi : 100W 
lo : 200 to 600W    mid/hi : 100 to 200W

Efficiency dB SPL @1W/1m
Continuous dB SPL level @1m
dB SPL peak level @1m***
dB SPL max level @1m****

lo : 99                    mid/hi : 102

Dimensions (H, W, D)

8.3" x 21.3" x 16.1" (210 x 540 x 410 mm)
36 lb (16,5 kg )

 * full range mode with processor         ** ND = magnetic neodimuim compression driver   *** AES2 Norrm 1984   ****AES2 Norm 2012






Versatile steel frame bumper for Uniline Compact rigging / stacking / transition



Light steel frame rigging bumper to hang until 8 x UC206




Advanced Digital Management System Processor 4in/8out, full control



APG switch mode amplifier, 2 x 2600 W into 4 ohm


da50 amplificateur accessoire

APG DSP amplifier, 4 x 3000 W into 4 Ohm