UC206W
Line Array compact speaker – Wide coverage
3 acoustic ways / bi-amp
2 x 6.5" Neodymium Low/Mid cone drivers
1 x Isotop15TM (5'' Neodymium / HF 1'', coaxial drivers)
The UC206W Uniline Compact line array incorporates 3-way acoustic design. The Lo/Mid section is fitted with two 6.5" cone drivers loaded in compression and optimized for low frequency reproduction.
Mid/Hi coherency comes from coaxial device fitted with 5" / HF 0.5" Neodymium drivers loaded by an Isotop15™ waveguide. This IsotopTM load employs an active annular horn and iso-phase plug to achieve acoustic impedance adaptation and performance comparable to traditional compression drivers, but with greatly increased bandwidth and power handling. Twin 6.5" loudspeakers serve Lo/Mid bandwidth between 80Hz and 450 Hz. The mid-range 5" speaker displays ultra-low distortion and extends from 450 Hz to 5kHz. The 0.5" HF driver operates smoothly from 5 kHz to 20 kHz.
Directivity control, compression, transducer phase alignment and protection are all established through the UC206’s advanced acoustic horn. The mechanical system is totally captive and allows use of Uniline Compact either rigged or stacked. UC115B enclosure is the optional dedicated low frequency enclosure that offers specific ergonomics for cardioids LF pattern control and rigging. APG subwoofers allow infra bass extension. Use of an APG digital processor is required.
Features
• Very compact wide coverage modular line array enclosure
• Constant horizontal directivity of 105°
• Integrated, intuitive and quick rigging system
Applications
• Short to medium throw sound reinforcement
• Front fill and Downfill speaker for UC206N line array
• Full range line array for vocal and background music
• Distributed FOH or immersive sound system
| Technical features | |
|---|---|
|
Usable bandwidth (± 10 dB)
SPL max @ 1m
Nominal directivity (H° x V°)
Nominal impedance |
55 Hz - 20 kHz
132 dB SPL (1)
105° x 15° (2)
16 ohm |
|
Transducers Topology Type of load Way and amplification section |
2 x 6,5'' ND with ventilated driver - 1 x Isotop15 (5''ND / HF 1'') Line Source - Isotop / K-Horn Bass Reflex - Line Source / Isotop / Constant directivity 3 ways, bi-amplified |
|
AES power (W) Maximum power handling (W) |
lo/mid : 300 W (3) mid/hi : 100 W lo/mid : 1200 W (4) mid/hi : 400 W |
|
Dimensions H,W,D (mm) Weight (kg) Connectors IP |
8,2" x 21,2" x 14,1" (210 x 540 x 360 mm) 35,2 lb (16 kg) 2 x Speakon NL4MP (5) 43 |
(1) Peak level @ 1m, 2πsr using 12dB crestfactor pink noise with APG preset (2) Nominal directivity @-6dB (3) Continuous power according to AES2-2012 in DCR (4) Peak power according to AES2-2012 in DCR (5) SPEAKON connectors are wired hot pin 1+, cold pin 1- (2+ and 2- are not connected)
| Options | ||
|---|---|---|
|
UCTRUSS |
 |
Versatile steel frame bumper for Uniline Compact rigging / stacking / transition |
|
UCRAIL |
Light steel frame rigging bumper to hang until 8 x UC206 |
|
| UCSTACK | Stacking part for UC206N/W - 8 speakers max |
| Electronics | ||
|---|---|---|
|
DMS48F |
 |
Digital processor, 4 inputs /8 outputs (DMS48F-D, DANTE version) |
|
DA8 |
 |
APG DSP amplifier, 4 x 2000 W @4 Ohms |
|
DA12 |
|
APG DSP amplifier, 4 x 3000 W @4 Ohms |
|
QUATTROCANALI |
 |
Quattrocanali range |