MX2
Indoor fixed installation coaxial speaker
2-way coaxial - passive crossover
Bass reflex
1 x 8" ferrite cone driver (1,75 voice coil)
1 x annular tweeter
The MX2 is fixed installation mid-range power speaker equipped with coaxial technology. Here, the coaxial technology is fully optimized to the maximum, since the high and low frequency transducers are physically aligned with each other, resulting in perfectly linear phase response. The MX2 is intended for small and medium size indoor sound systems as well as for additional distributed sound in large installations.
From an acoustic point of view, the 8" driver allows a very smooth reproduction in low frequencies while the tweeter offers the precision of the best studio monitor or Hi-Fi speakers. This exclusive coaxial assembly produces a consistent sound field across a wide 110° conical dispersion beyond 10 KHz.
The MX2 is available in two different versions: MX2 in natural beech wood finish or MX2N in black ash veneer finish. The MX2 can be installed in many ways: wall, ceiling- or truss-mounted via its specific rotating lyre bracket (option ETMX2), or simply put on a shelf.
When used in full range mode, the MX2 is ideal for conference applications, background music or as additional satellites for a large P.A. system.
Combined with subwoofers, the MX2 constitute a high quality surround system ideal for music applications in high class restaurants, cabarets or private clubs. It is also suitable for live music bars and small theatres. For low frequency reinforcement, the recommended subs are SB115, SB112, SB115-M2 and SB118.
Features
• "Studio monitor" sound reproduction
• Very low distortion
• Perfect linear phase response
• Wide acoustic coverage pattern
Applications
• High class sound system
• Distributed sound system
• Additional sound reinforcement
• Fixed installation
| Technical characteristics | |
|---|---|
|
Acoustic way / Mode |
2 way / mono amp |
|
Bandwidth @ -3dB |
65Hz - 24kHz* |
|
Nominal Impedance |
8 Ohm |
|
Efficiency dB SPL @1W/1m |
95 |
|
Dimensions (H, W, D) |
360 x 240 x 220 mm |
* full range mode with processor ** AES2 Norrm 1984 ***AES2 Norm 2012
| Options | ||
|---|---|---|
|
ETMX2 |
 |
Lyre bracket for MX2 and MX2N speakers |
|
T50 |
 |
Line transformer 70V / 100V, 50W |
|
T100 |
 |
Line transformer 70V / 100V, 100W |
|
Options |
Custom colours and weatherproofing |
| Electronics | ||
|---|---|---|
|
DMS48F |
 |
Advanced Digital Management System Processor 4in/8out, full control |
|
SA20:2 |
 |
APG switch mode amplifier, 2 x 1950 W into 4 ohm |
|
DA15:2 |
 |
APG DSP amplifier, 4 x 1500 W into 4 Ohm |