UL210D

Down fill speaker

3 acoustic ways – bi-amp
2 x 10" neodymium (w/2" voice coil)
1 x APG ISOTOP™ driver (10° V)
Constant directivity horn (105° H)

Isotop Appolito

The UL210D is the mid-throw and down-fill element of the "Modular Line Array" UNILINE system, which also consists of the UL210 long throw speaker, the UL115B bass speaker and the UL118B infra-bass subwoofer. A very wide variety of UL210/UL210D/UL115B/UL118B configurations are possible thanks to the acoustical and mechanical modularity of the system which offers virtually, an unlimited number of combinations for optimal coverage of just about any site.

The UL210D speaker uses same equipment as the UL210, almost the same IsotopTM driver to ensure perfect a line source alignment and sonic performance throughout the mid-hi frequency range (450Hz – 19kHz). From an acoustic point of view, the horizontal opening achieves up to 105° of constant directivity in the mid-hi frequency range.
It is designed and optimized for short/medium throw applications and for down-fill use at the bottom of a main UL210 speaker cluster where it can be used in configurations of 1 to 4 units.
The rigging system is identical to the UL210, as are the transport and storage systems (dollies and flight cases). Methods of set up and use are also the same.

The UL210D can be used as a stand-alone system, anything from 3 to 12 UL210D speakers may be used.
The Uniline system is fully controlled by digital APG processing which for complete library of presets are provided.

Features

• Exceptional power/weight ratio
• Intuitive integrated rigging system (same as UL210)
• Sophisticated transport and assembly
• Constant horizontal directivity (105°)

Applications

• Short or medium throw acoustic coverage
• Down-fill speaker
• Fixed or temporary installations

Acoustic simulation

• Ease Focus
• Ease

Technical characteristics

Acoustic way  / Mode
Transducer (Ø coil)

3 way / bi amp
2x10"ND (2")**    
1xIsotop10TM ND

Bandwidth @ -3dB
Directivity @ -6dB

80Hz - 19kHz*
105°H x 10°V

Nominal Impedance
Power AES
Recomended amplification

lo : 8 Ohm              mid/hi : 8 Ohm
lo : 400W                 mid/hi : 300W 
lo : 300 to 800W    mid/hi : 200 to 600W

Efficiency dB SPL @1W/1m
Continuous dB SPL level @1m
dB SPL max level @1m***
dB SPL peak level @1m****

lo : 101                    mid/hi : 105
127
133
139

Dimensions (H, W, D)
Weight

264 x 700 x 584 mm
34 kg

 * full range mode with processor         ** ND = magnetic neodimuim compression driver   *** AES2 Norrm 1984   ****AES2 Norm 2012

 

 

Options  

UL210WB

 ul210wb

Dolly for UL210 (up to 6 speakers)

UL210WBDA

  Adaptor for UL210D fitting on UL210WB

ULTRUSS

ultruss 

Truss for Uniline system (lifting and stacking)

FC2ULTRUSS

fcdx1

Flight Case for 2 x ULTRUSS + accessories

ULTRUSSFFS

 ultrussffs 4 feet for floor stacking with ULTRUSS

ULTRUSSFSP

 

Flying sliding piece for ULTRUSS

ULTRUSSBST

  Banana Shape Piece for stacked configuration with ULTRUSS

FCUL210DV2

 

Flight Case Bell for 2 x UL210D

ULRAIL

 ulrail

Light stacking piece for small small size system

ULSTACK

 ulstack

Light lifting piece for small size cluster

Electronics  

DMS26

dmS26 

Digital Processor, 2in/6out, first level control

DMS48

 dms48

Advanced Digital Management System Processor 4in/8out, full control

SA30:2

 sa30

APG switch mode amplifier, 2 x 2600 W into 4 ohm

DA50:4

da50 amplificateur accessoire

APG DSP amplifier, 4 x 3000 W into 4 Ohm