APG6000

Line source matrix system

2 enclosures – 4 acoustic ways
3 x 15" Neodymium cone drivers (4" coil)
2 x APG ISOTOP™ coaxial drivers (5°V)

Isotop Appolito

The APG6000 belongs to APG’s family of Matrix Array. The collinear technology of the Matrix Array technology is the foundation of the Matrix sound design concept i.e. the ability to create coherent configurations thanks to the simultaneous control of horizontal and vertical coverage.

The APG6000 comprises two individual speakers, 6000HI and 6000LO, which share the same external dimensions for easy mechanical assembly. It is designed for vertical line source coupling and long throw coverage. The dynamic capacity of the APG6000 and its impressive SPL-to-size ratio makes it one of the most powerful systems in the market. Based on the same ergonomics as the APG4000 system, the APG6000 is the dedicated long-throw complement for the APG4000. It is ideal for high power F.O.H applications, either on tour or in fixed installations, and for both indoor and outdoor use.

The complete ergonomics of the speakers, the hanging and transportation systems are all fully optimised to facilitate setup in touring conditions. The APG4000 and APG6000 systems are both compatible and complementary. They use the same internal components and technologies. They have in common the same horizontal dispersion angles, the same installation principles and the same connectors and flying systems. For very low frequency extension, the recommended subs are: TB218S and TB118S.

Features

• Exclusive IsotopTM technology
• High directivity index (60°H by 5°V)
• Exceptional SPL
• Integrated flying system

Applications

• High precision long throw coverage
• Fixed installation
• Indoor or outdoor
• Long-throw complement to APG4000

Technical characteristics6000HI6000LO

Acoustic way  / Mode

Transducer (Ø coil)

3 way / bi amp

1x15"ND (4")**    

2xIsotop5TM

1 way / mono amp

2x15"ND (4")**    

Bandwidth @ -3dB

Directivity @ -6dB

65Hz - 19kHz*

60°H x 5°V

45Hz - 160Hz*

Nominal Impedance

Power AES

Recommended amplification

mid : 8 Ohm                     hi : 16 Ohm

mid : 1150W                     hi : 350W 

mid : 1150W to 2300W      hi : 350W to 700W

2 x 8 Ohm

2 x 1150W

2 x 1150W to 2300W

Efficiency dB SPL @1W/1m

Continuous dB SPL level @1m

dB SPL peak level @1m***
dB SPL max level @1m****

mid : 104           hi : 112

138

144
150

104

137

143
149

Dimensions (H, W, D)

Weight

520 x 750 x 780 mm

67 kg

520 x 750 x 780 mm

53 kg

 * full range mode with processor         ** ND = magnetic neodimuim compression driver  *** AES2 Norrm 1984   ****AES2 Norm 2012

Options  

6TRUSS

6truss 

Rigging Truss for 4000 & 6000 systems

6000PR

 

Wheelboard for 4000 & 6000 speakers

6LB 6000pr Lift bar + 2 shackles for 2 columns of Matrix Array
6RCAV 6rcav Front vertical rigging piece for Matrix 6000 speakers
6RCAR   Rear vertical rigging piece for Matrix 4000 and 6000 speakers
6RAAV   Front horizontal coupling piece for 6TRUSS
6RAAR 6raar Rear horizontal coupling piece for 6TRUSS
QRP23EL qrp23 Quick Release Pin L=23mm with sling (4000 and 6000 backside)
QRP43EL   Quick Release Pin L=43mm with sling (front 6000)
Electronics  

DMS48F

dms48 

Digital speaker controller 4in, 8 out

SA30:2

 sa30

APG switch mode amplifier, 2 x 2600 W into 4 ohm

DA50:4

da50 amplificateur accessoire

APG DSP amplifier, 4 x 3000 W into 4 Ohm